Spot Stain Chalk - C005931-CS1018
DIRECTIONS FOR STAINS BELOW WATER: Wearing gloves, gently rub Spot Stain Chalk directly onto the surface stain to build up a layer of stain- removing chalk.
Most stains will dissipate shortly after contact. If needed, use a nylon brush or similar non-abrasive pad to help lift stains.
ALTERNATIVE METHOD: Place Spot Stain Chalk directly onto the stain but for no more than 5 minutes at a time, checking stain occasionally.
Once stain has lifted, remove this product. Older and difficult stains may need to be treated with a sequestering agent prior to use.
A sequestering agent should be used after removal of stains to prevent stains from reappearing.
DIRECTIONS FOR STAINS ABOVE WATER: Apply a small amount of water onto area being treated.
Gently rub Spot Stain Chalk onto wetted stain to form a paste.
Most stains will dissipate shortly after contact. Brush treated area as needed.
Rinse after 1 minute and repeat process as needed.
Do not allow rinsed material to dry on hard surfaces.
- Spot Stain Chalk is applied directly to the problem area to remove stains created by metals and organic stains from leaves and debris.
- Two chalk pucks in each container
- Unused chalk puck can be dried and re-used
- This product is safe for all hard surfaces, including plaster, vinyl, tile, concrete and fiberglass.
- DIRECTIONS FOR STAINS BELOW WATER: Wearing gloves, gently rub Spot Stain Chalk directly onto the surface stain to build up a layer of stain- removing chalk.
- Most stains will dissipate shortly after contact. If needed, use a nylon brush or similar non-abrasive pad to help lift stains.
- ALTERNATIVE METHOD: Place Spot Stain Chalk directly onto the stain but for no more than 5 minutes at a time, checking stain occasionally.
- Once stain has lifted, remove this product. Older and difficult stains may need to be treated with a sequestering agent prior to use.
- A sequestering agent should be used after removal of stains to prevent stains from reappearing.
- DIRECTIONS FOR STAINS ABOVE WATER: Apply a small amount of water onto area being treated.
- Gently rub Spot Stain Chalk onto wetted stain to form a paste.
- Most stains will dissipate shortly after contact. Brush treated area as needed.
- Rinse after 1 minute and repeat process as needed.
- Do not allow rinsed material to dry on hard surfaces.