Lo-Chlor Lo-Phos Max Phosphate Remover - 1 Qt - LO-PHOS-MAX-QT

LO-CHLOR, LLCSKU: LO-PHOS-MAX-QT

Price:
Sale price$45.49
Stock:
Only 10 units left

Pickup available at The Pool Supply Warehouse

Usually ready in 24 hours

Carbon-neutral shipping with Shopify Planet
Carbon-neutral shipping on all orders
2,387kg
shipping emissions removed
That's like...
6,111
miles driven by an average gasoline-powered car
We fund innovations in...
Direct Air Capture
Bio Oil
Mineralization

Safe. Powerful. Affordable. Phosphates in your pool water are algae food. Eliminate the food and the algae cannot grow. Lo-Phos Max effectively eliminates phosphates from pool water and minimizes pool maintenance, reducing the use of other chemicals, and saving you money!

DOSAGE RATES:

If algae are present, add a treatment of Lo-Chlor 90-Day Algicide prior to beginning phosphate removal. Clean or backwash filters and ensure pool water is balanced. Test pool water for phosphate levels using a test kit approved for swimming pool use. Using the chart below, measure the required quantity of Lo-Chlor Lo-Phos Max for your pool. Slowly add Lo-Phos Max directly to the pool, distributing over as wide an area as possible.  

Dosage Chart

Phosphate Level (ppb)

Pool Capacity

500

1000

2000

3000

10,000

1.0 oz

2 oz

4 oz

5 oz

15,000

1.5 oz

3 oz

6 oz

7 oz

20,000

2.0 oz

4 oz

7.5 oz

9 oz

 

Metric Dosage Chart

Phosphate Level (ppb)

Pool Capacity

600

1200

2400

3500+

32 m3

1 oz

2 oz

4 oz

6 oz

50 m3

1.5 oz

3 oz

6 oz

8 oz

64 m3

2 oz

4 oz

8 oz

10 oz


DIRECTIONS FOR USE:

  1. Immediately following the addition of Lo-Chlor Lo-Phos Max, place one Lo-Chlor Miraclear Pool Clarifier Tab in pump basket (follow package directions) OR use 2 oz. of Miraclear Blue Liquid Clarifier per 4,000 gallons (2 oz. per 15 m3) of pool water. The addition of clarifier will help clear the cloudiness associated with phosphate removal.
  2. Run filtration system continuously for 24 hours. Check filter pressure regularly and backwash, if necessary.
  3. Retest phosphate level of pool water at least 24 hours after treatment. If necessary, repeat dosage of Lo-Chlor Lo-Phos Max at weekly intervals until phosphate level is within acceptable range. For faster results, Lo-Phos Max dosage can be repeated at 24-hour intervals. Refer to above chart for dosage rate.
  4. Test pool regularly for residual phosphate levels.
  5. To maintain phosphate level below 125 ppb (parts per billion), add 1 oz. of Lo-Phos Max to a 15,000-gallon (1 oz per 57 m3) pool weekly.
  • Eliminates phosphates
  • Highly concentrated formula
  • Boosts efficiency of sanitizing chemicals
  • Helps salt chlorine generators work more efficiently • Compatible with all pool chemicals
  • Economical and effective
  • Safe for your family and the environment
  • Non-toxic
WARNING: The following product(s) can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov

You may also like

Recently viewed